SONY UVW-1200 Betacam SP Player   PRODUCT DETAILS Offering the high-quality video and audio of the Betacam SP format the UVW1200 is designed to be an integral part of a professional distribution or post production system. It features built-in time base stabilizer built-in time code reader 90 minute playback 16 times picture search RS-232C remote interface composite output Y/C composite output switchable component (Y R-Y B-Y) or RGB outputs. With the performance advantages of the Betacam SP format and its own features the UVW1200 is a valuable addition to any visual communication system. PRODUCT FEATURES Long operating timeHigh Quality AudioDolby C-type Noise Reduction SystemHigh Speed Picture Search5 times normal speed in color and up to 16 times normal speed in monochrome—both in forward and reverse.Built-in Time Base StabilizerProvides stable pictures without additional equipment.Built-in Time Code ReaderSerial 2-pin Remote Control Interface Complied with RS-232C.RGB and Y/R-Y/B-Y Component Video Signal OutputComposite Video Signal OutputsS-Video Signal OutputAccepts both S-size and L-size cassettes offering operating times of up to 30 minutes and over 90 minutes respectively.Two longitudinal audio channels are provided. The high tape speed (118.6 mm/s) of the format and the adoption of the proven Dolby C-type Noise Reduction System provides the UVW1200 offers high quality audio with a wide dynamic range; even at high frequencies there is minimum distortion and an excellent signal-to-noise ratio.The high speed picture search provides a recognizable picture at various speeds over a range of up to five times normal speed in color and up to 16 times normal speed in monochrome both in forward and reverse.Provides stable pictures without additional equipment. Advanced high quality digital dropout compensation also ensures consistent picture performance.The Betacam SP format has an independent time code track; therefore a longitudinal audio track does not have to be sacrificed for time code. A time code reader is built into the UVW1200. The time codes conform to the SMPTE standard in which LTC and User-bits are provided. LTC is used to identify the absolute address of a frame while User-bits are reserved for operator's use.Power requirements: AC 90 to 132 V 48 to 64 HzPower consumption: 63WOperating temperature: 5C to 40C(41F to 104F)Humidity: Less than 80%(relative humidity)Tape speed: 118.6mm/sPlayback time: More than 90 min with UVWT-90MLAMore than 30 min with UVWT-30MAFast forward time: Less than 3 min with UVWT-90MLARewind time: Less than 3 min with UVWT-90MLAS/N ratio: Luminance (Component OUT) More than 49dBChrominance AM More than 52dBPM More than 52dBY/C delay: Less than 30 nsFrequency response: 50 Hz to 12.5 kHz +2.0/-3.0 dBWow and flutter: Less than 0.18% rmsS-VIDEO OUT: Y: 1.0 Vp-p75C: 0.286Vp-p(burst) 75REMOTE IN/OUT: 25-pin female complied with RS-232CHEADPHONES: JM-60 headphone stereo jackCONTROL/S: Mini jackSearch speed(with optional SVRM-100)*1: SHUTTLE 15 steps still to 16 times normal speed forward and reverseJOG Frame be frame forward and reverseBandwidth: Luminance (50% modulation) 30Hz to 4.0 MHz +1.0/-4.0 dBColor difference (50% modulation) 30Hz to 1.5Mhz +1.0/-4.0 dBK-factor(2Tpulse): Less than 3%S/N ratio(at 3% distortion level): More than 70 dBDistortion T.H.D.(at 1kHz reference level): Less than 1.5%REF VIDEO IN(BNC): 1.0Vp-p 75VIDEO OUT 1(BNC): Composite video 1.0 Vp-p 75 sync negativeVIDEO OUT 2(BNC): Composite video 1.0 Vp-p 75 sync negative with or without character insertionRGB/Component Out (BNCx3): Y/Sync on G 1.0Vp-p 75 sync negativeR-Y/R 0.7Vp-p 75B-Y/B 0.7Vp-p 75AUDIO LINE OUT (XLR 3 pin male)CH 1/2: +4dBu*2600balancedCH 1/2: -6 DbU   See More Betacam Player